Heat & Glo LifeStyle SLR-C (COSMO) Top Vent - Horizontal Termination - continued, V Minimum

1. Top Vent - Horizontal Termination - (continued)

Top Vent - Horizontal Termination

Venting with 2 elbows

	V Minimum		H1 + H2 MAXIMUM
				SLR-C
	90° Elbow		1 ft.		305 mm
1 ft.		305 mm	2 ft.		610 mm
2 ft.		610 mm	4 ft.		1.2 m
3 ft.		914 mm	6 ft.		1.8 m
4 ft.		1.2 m	15 ft.		4.6 m

H1 + H2 MAX. =15 ft. (4.6 m)

V + H1 + H2 MAX. = 40 ft. (12.2 m)

Note: Use SLP Series components only.

Note: There MUST be a 25% reduction in total H when using flex vent except when using the simple up and out installation (see Figure 7.3).

CAUTION: The SLP-HRC-SS and SLP-HRC-ZC-SS termination caps are not approved for use with pro- pane (LP) fuel. May lead to elevated glass temper- ature that may cause tempered glass breakage.

H2

H1

INSTALLED

HORIZONTALLY

V1

Figure 7.5

26 Heat & Glo • SLR-C • 2292-900 Rev. D • 8/12