Heat & Glo LifeStyle SLR-C (COSMO) owner manual B. Mantel and Wall Projections

B. Mantel and Wall Projections

WARNING! Risk of Fire! Comply with all minimum clear- ances to combustibles as specified. Framing closer than the minimums listed must be constructed entirely of noncom- bustible materials (i.e., steel studs, concrete board, etc.) Failure to comply could cause fire.

Note: For non-combustible fireplace finish material (marble, stone, etc) specifications refer to Section 13.C.

Combustible Mantels

1/2 IN. Thick Wall

Sheathing 12 IN.

MAX.

MEASUREMENT

14 IN. FROM TOP OF MIN. FIREPLACE

OPENING

Figure 13.5 Clearances To Combustibles Mantels Or Other Combustibles Above Appliance

Non-combustible Mantels

1/2 IN.
Thick Wall	12 IN.
Sheathing
	MAX.
	14 IN.
	MIN.
MEASUREMENT
FROM TOP OF
FIREPLACE
OPENING	1 IN.MIN.
	4 IN.
	MAX.
Figure 13.6 Clearances To Non-Combustible Mantels Or Other
Non-Combustibles Above Appliance

Combustible Mantel Legs Or Wall Projections Extending Past The Face Of The Fireplace

		2 IN.
FIREPLACE	MINIMUM		3 FT. MAXIMUM
OPENING
		6 IN.
	MINIMUM

Figure 13.7 Combustible Mantel Leg or Wall Projections (Acceptable on both sides of opening)

Non-combustible Mantel Legs Or Wall Projections Extending Past The Face Of The Fireplace

		3 IN.
				UNLIMITED
FIREPLACE	MINIMUM
OPENING			7 IN.

Figure 13.8 Non-Combustible Mantel Leg or Wall Projections (Acceptable on both sides of opening)

Heat & Glo • SLR-C • 2292-900 Rev. D • 8/12 53