Heat & Glo LifeStyle SLR-C (COSMO) owner manual C. Clearances, Minimum Framing Dimensions

C. Clearances

NOTICE: Install appliance on hard metal or wood surfaces extending full width and depth. DO NOT install directly on carpeting, vinyl, tile or any combustible material other than wood.

WARNING! Risk of Fire! Maintain specified air space clearances to appliance and vent pipe:

•Insulation and other materials must be secured to prevent accidental contact.

•The chase must be properly blocked to prevent blown insulation or other combustibles from entering and making contact with fireplace or chimney.

•Failure to maintain airspace may cause overheating and a fire.

Note: Figure 5.2 shows the fireplace installed on the floor. However, this fireplace can be elevated off the floor provided that the fireplace is properly supported by framing materials and the ceiling clearances are maintained.

A

F

B

C

D

MEASURE FROM TOP

OF FIREPLACE OPENING

E

H

J

G

I

MINIMUM FRAMING DIMENSIONS*

	A	B	C	D	E	F	G	H	I	J
	Rough	Rough	Rough	Rough	Clearance	Combustible	Combustible	Behind	Sides of	Front of
	Opening	Opening	Opening	Opening
					to Ceiling	Floor	Flooring	Appliance	Appliance	Appliance
	(Vent Pipe)	(Height)	(Depth)	(Width)
Inches	8-5/8	42 1/4	18-1/4	50	31	0	0	1	1	36
Millimeters	219	1073	464	1270	787	0	0	25	25	914

* Adjust framing dimensions for interior sheathing (such as sheetrock)

Figure 5.2. Clearances to Combustibles

Heat & Glo • SLR-C • 2292-900 Rev. D • 8/12 19