3 Get started
Caution
•• Use the controls only as stated in this user manual.
Always follow the instructions in this chapter in sequence.
If you contact Philips, you will be asked for the model and serial number of this apparatus.The model number and serial number are on the back of the apparatus.Write the numbers here: Model No. __________________________
Serial No. ___________________________
Install the stand
1 Place the PhotoFrame on a flat surface.
2 Insert the supplied stand to the stand hole of the PhotoFrame.
Connect power
Note
•• When you position the PhotoFrame, make sure that the power plug and outlet are easily accessible.
Connect the supplied power adaptor to:
•the DC IN socket of the PhotoFrame
•the AC outlet
»»A few seconds later, the PhotoFrame turns on automatically.
Turn on the PhotoFrame
Note
•• When you connect the PhotoFrame to a power supply, the PhotoFrame turns on automatically.
When the PhotoFrame is turned off and connected to the power supply, press and hold 
to turn on the PhotoFrame.
EN 7
