Trouble Shooting
Before You Call For Service
| Problem | Possible Cause | What to do |
| No Power. | A fuse in your home may | Replace fuse or reset circuit breaker. |
|
| be blown or the circuit |
|
|
| breaker tripped. |
|
|
| Power surge. | Unplug the beverage center, wait a |
|
|
| few seconds and then plug it back in. |
|
| Plug not fully inserted into | Make sure the |
|
| wall outlet | inserted into outlet. |
| Cabinet Temperature | Temperature setting | Verify the temperature control setting. |
| too High |
| adjust if neccessary |
|
| Door not shut properly | Ensure that the door is fully closed |
|
| or opened excessively | and that the gasket is sealing. against |
|
|
| the cabinets. Open the doors only as |
|
|
| needed and for short periods of time |
|
| Interior lights toggled on | The interior lights are intended for |
|
|
| temporary lighting of cabinets for |
|
|
| display purposes only. They are not |
|
|
| intended to be left on for prolonged |
|
|
| time periods |
|
| Exhaust vent is obstructed | Verify there is nothing blocking the |
|
|
| front mounted exhausting vent. |
|
| Recently added a large | Limit the quantity of warm beverages |
|
| quantity of warm beverages | being introduced to the cabinet at the |
|
| to the cabinet | same time. Attempt to stagger the |
|
|
| load introduction if possible. |
| Condensation on the | High humidity conditions | The condensation will subside once |
| cabinet and/or doors | in the home. | humidity conditions return to normal. |
|
| Door not shut properly | Ensure that the door is fully closed |
|
| or opened excessively | and that the gasket is sealing. against |
|
|
| the cabinets. Open the door only as |
|
|
| needed and for short periods of time |
| |||
If none of the above rectify the situation please contact our customer care department | |||
at |
|
10