Care and Maintenance
CleaningStorage
CAUTION: Before attempting to clean and/ or service this unit, always disconnect the power supply cord from the electrical power supply/outlet.
1.DO NOT use gasoline, benzene, paint thinner, or any other chemicals to clean this unit, as these substances will damage/ deform both plastic components and luster finish.
2.Never attempt to clean the unit by pour- ing water directly over any of the surface areas, as this will cause deterioration of elec- trical components and wiring insulation.
3.Use only a mild dish washing detergent, lukewarm water and a soft cloth to wipe the exterior surface of the unit and dry thor- oughly.
TROUBLE SHOOTING GUIDE
When the dehumidifier is not being used for long time periods, please follow these instructions.
1.Disconnect the power cord from the power supply.
2.Empty the water tank and wipe (clean) thoroughly.
3.Clean air filter thoroughly
4.
5.Store the unit upright in a dry location.
Frequently, some problems are of a minor nature and a service call may not be neces- sary. Use this troubleshooting guide to iden- tify possible problems you may be experi- encing. If the unit continues to operate improperly, call your local Danby® Service Depot or
PROBLEM | POSSIBLE CAUSE | |
|
| |
| Check power cord connection. | |
Unit will not operate. | Check electrical outlet for blown fuse. | |
Check if water tank is full (empty). | ||
| ||
| Check water tank is properly installed. | |
|
| |
| Air filter is dirty and/or blocked. | |
Dehumidifying capacity | Ambient room temperature too low. (below 3°C/38°F) | |
(moisture removal) low. | Poor airflow circulation / obstruction of front grill. | |
| Relative Humidity in surrounding environment very low. | |
|
| |
Relative Humidity setting not | Check all doors and windows are closed. | |
reached after long period of | Area/room is too large for the capacity of the | |
operation. | dehumidifier. | |
|
|
11
