KEY PAD FUNCTIONS.
1
7
6
5
9
8
4
3
2
1.LED (SETTING HUMIDITY): The LED window displays the following information independently;
A.Set Operating Relative Humidity Value.
B.Fuction indicator will light up; (Fan Speed, Time, Self Dry)
2.ON/OFF Button : Each time this button is pressed the unit turns On (adjacent indicator light illuminates) or Off (adjacent indicator light is not illuminated).
3.HUMIDITY DOWN: This button allows you to decrease the relative humidity setting. Each time this button is pressed the RH value setting is decreased incrementally by 5%. (ranging from 80% ~ 35%)
4.HUMIDITY UP: This button allows you to increase the relative humidity setting. Each time this button is pressed the RH value setting is increased incrementally by 5%. (ranging from 35% ~ 80%)
5.SELF DRY:Self Dry mode can be used to clean the unit and removes excess humidity. You can operate Self Dry mode when the dehumidifier is powered on or off.
The inside moisture of the unit is removed in 30 minutes.
After 30 minutes, the product will power off.
6.CONTINUOUS: Used for Continuous Dehumidifier Operation. (unit will run
LED will be displayed [
].
7.FAN SPEED: Press the Fan speed button to select the fan speed (Hi/Low)
8.Timer: Press the Timer button to select the off timer to shut off in 3Hr 6Hr or 12Hr.
9.WATER FULL INDICATOR: This (red) light illuminates under the following conditions;
A. When the internal water tank is not properly installed inside the cabinet.
B. When the internal water tank is full. The Water tank must be emptied and replaced back in the cabinet before normal operating conditions can resume.
7
