Operating Instructions
Indicator Light Function:
LED Display:
When the unit is first connected to an electrical outlet, the LED will not light until the “on/off” button is pressed. When the “on/off” button is pressed, the dehumidifier will automatically default to the factory default setting. (See Factory Default Setting for details)
IMPORTANT NOTE: Depending on the humidity conditions of the surrounding environment, the dehumidifier may not start automatically when the “on/off” button is pressed.(see dehumidifier operating instructions for details)
In the event of a power failure, the unit will
Water Full Indicator Light (Red):
When the water tank is full and /or incorrectly positioned inside the cabinet, the (water full) red light turns on and remains on until such time the tank is emptied and/or correctly
Factory Default Setting:
The electronic circuit board automatically defaults to the following factory setting.
Humidity Setting: 50%
Fan Speed: Hi
Water Tank Operation:
Proper installation of the water tank is crucial in maintaining reliable dehumidifier operation. The water tank holds accumulated condensed water and by means of a safety switch controls both the water level and operation of the dehu- midification process.
i.e. When the water tank is full and/or accidentally displaced inside the cabinet, the float switch actuator (inside the tank) breaks contact with the safety switch.
This condition results in the immediate shut down of the compressor, preventing moisture from being condensed.
IMPORTANT: Never tamper with or attempt to defeat the water level (safety) float switch system.
8
