Using the “Econo” Feature

The "Econo" feature gives you the option of washing dishes at "normal" incoming water tank temperature. (usually between 130°~140°F / 54.4°~60°C)

When activated, the "Econo" feature "de-energizes" (by-passes) the heating element.

To activate the "Econo" feature push the "Sani/Econo" button on the control panel.

•Push button "out" the "Econo" feature is activated. (Sani-Wash indicator light remains off)

IMPORTANT

When the "Econo" feature is activated, drying time for the dishes will be increased. The dishes dry by a "convection" method only. To speed-up the drying time, suggest you leave the dishwasher door partially open after the program is complete. This will allow humidity from within to escape. Push the door open button and the door pops opens to a pre-set convection dry position.

Operating Instructions

To operate the dishwasher;

1.Attach the quick connect hose assembly to the faucet.

2.Push the door release button to open the door.

3.Place the dishes on the dishrack and cutlery inside the cutlery basket.

4.Fill the detergent area on inner door panel. (approx. 7 grams)

NOTE: If using the "Pre-Rinse" cycle only, it is not necessary to add detergent.

5.Close the door firmly.

6.Open the hot water faucet.

7.Turn the selector switch to the desired wash program. (Pre-Rinse, Normal, Short)

8.Push the power (on/off) button.

•Push Button in = power on.

•Push Button out = power off.

The power light will illuminate indicating the machine is receiving power.

9.The dishwasher stops automatically at the end of the program. Both the power light and sani-wash light will remain illuminated, until the power (on/off) button is switched off.

NOTE: At the beginning of each cycle, the dishwasher always starts in the "drain" mode. This is because the drain pump always retains a small amount of water (in the sump) from the previous (last) cycle. This is necessary to keep the pump primed.

Therefore, don't be alarmed if you see a small amount of water being pumped-out from the drain hose prior to the start of the regular wash cycle. (THIS IS NORMAL)

Program Summary/Selection

PRE-RINSE

Water Temperature: Incoming Water (Tank Temperature)

Program Duration: 6 Minutes

Water Consumption: 3.2 liters / 0.84US/gal.

NORMAL/SANI-WASH

Water Temperature: 151°F/66°C

Program Duration: 35 Minutes

Water Consumption: 12.8 liters / 3.3US/gal.

NORMAL/ECONO

Water Temperature: Incoming Water (Tank Temperature)

Program Duration: 35 Minutes

Water Consumption: 12.8 liters / 3.3US/gal.

SHORT/SANI-WASH

Water Temperature: 151°F/66°C

Program Duration: 23 Minutes

Water Consumption: 9.6 liters / 2.5 US/gal.

SHORT/ECONO

Water Temperature: Incoming Water (Tank Temperature)

Program Duration: 23 Minutes

Water Consumption: 9.6 liters / 2.5 US/gal.

6