Danby DPAC 9009 manual Important Safety Information, Power Supply, Cord, Energy, Saving Tips

Models: DPAC 9009

1 26
Download 26 pages 43.48 Kb
Page 5
Image 5
POWER SUPPLY

IMPORTANT SAFETY INFORMATION

POWER SUPPLY

The power cord supplied with this air conditioner contains a

device that senses damage to the power cord. To test if your

CORD

power cord is working properly, you must do the following:

1)Connect the power supply cord to an electrical outlet.

2)The power supply cord has two buttons located on the head of the plug. One button is marked “TEST”, and the other is marked “RESET”. Press the “TEST” button; you will hear a click as the “RESET” button pops out.

3)Press the “RESET” button; you will hear a click as the button engages.

4)The power supply cord is now energized and supplying electricity to the air conditioner (on some products this is also indicated by a light on the plug head).

NOTE: The power cord supplied with this air conditioner contains a current leakage detection device designed to reduce the risk of fire. In the event the power supply cord is damaged, it cannot be repaired and must be replaced with a new cord from the product manufacturer.

Under no circumstances should this device be used to turn the unit on or off.

The “RESET” button must always be pushed in (engaged) for correct operation.

The power supply cord must be replaced if it fails to reset when the “TEST” button is pushed in.

ENERGY-

Your Danby appliance is designed to be highly efficient in energy

SAVING TIPS

savings. Follow these recommendations for greater efficiency.

4) Start your air conditioner before the

1)Select a thermostat setting that suits your outdoor air becomes hot and

comfort needs and leave at that chosen

uncomfortable, to avoid an initial period of

setting.

discomfort while the unit is cooling off the

2) The air filter is very efficient in removing

room. Use of the automatic start/stop

programmable TIMER feature can be a

airborne particles. Keep the air filter clean

major asset in this regard if utilized to the

at all times.

fullest extent.

3) Use drapes, curtains or shades to keep

5) When outdoor temperatures are cool

direct sunlight from penetrating and heating

enough, turn the air conditioner off and use

room, but do not allow drapes or curtains to

the FAN MODE. This circulates indoor air,

obstruct the air flow around the unit.

providing some cooling comfort while

 

utilizing less electricity.

4

Page 5
Image 5
Danby DPAC 9009 manual Important Safety Information, Power Supply, Cord, Energy, Saving Tips