OPERATION- Features of the Control Panel
Warning Light
Receiving Sensor
KEY PAD FUNCTIONS | NOTE: By pressing both | |
POWER SWITCH:Turns unit ON/OFF | buttons at the same time for more | |
than 3 seconds, the display will | ||
| ||
MODE: Allows you to scroll through and | toggle between Celsius and | |
select desired operating mode. | Fahrenheit. | |
FAN: Select from three different fan | Warning Light | |
Condensed water may accumulate in | ||
settings; High, Medium, and Low. | ||
the unit. If the internal tank becomes | ||
| ||
full, the Warning signal in the LCD | ||
Display will light up and the unit will not | ||
| ||
| operate until it has been drained. | |
| ||
Auto off- With machine in running mode, press | LCD Display | |
timer button to set timer control. Press | Cooling Mode | |
buttons to select number of hours you | ||
would like the unit to run before it automatically | Dehumidify Mode | |
shuts off. | ||
Fan Only Mode | ||
Auto on- With machine in stand by mode, | ||
press timer button to set timer control. Press | High Fan Speed | |
buttons to select number of hours before | ||
Medium Fan Speed | ||
the unit automatically starts running in air | ||
conditionning mode. | Low Fan Speed | |
| ||
NOTE: The time is adjustable between | Display Set Temperature | |
hours. | Display Timer Setting of Auto | |
| ||
TEMPERATURE Adjust: | Switch ON / OFF | |
Warning Light (the machine will | ||
• Used for adjusting the thermostat. | ||
stop running) | ||
• The default display is room temperature. | ||
| ||
• In cooling mode, when |
| |
button is pressed, the set temperature is |
| |
displayed and may be adjusted. After 15 seconds |
| |
the display will revert back to room temperature. |
| |
Temperature is only adjustable in cool mode. |
|
6