Datalogic Scanning C-BOX 150 2.6.3 6000, 8000 Family Scanners

C-BOX 150

2.6.3 6000, 8000 Family Scanners

For the 6000 and 8000 scanner families, the C-BOX 150 can operate in both point-to-

point single scanner configuration layouts, and in a network cluster of scanners in

Master/Slave layouts.

Master

Slave 2 Slave1

C-BOX 150

BTK-6000

CAB-610X CAB-610X

CAB-60XX

Encoder

CAB-610X

Host

CAB-610X

CAB-610X CAB-63XX

BTK-6000

Slave 5 Slave 4 Slave 3

PWR-240

CAB-63XX

Figure 19 – Typical Lonworks scanner Layout

NOTE

In a Master/Slave layout with a great number of Slaves, a Power

Supply Unit can be connected to the scanners and the C-BOX 150

can accept the scanner power by setting the Power Source Jumper

in the right position. See paragraph 2.4.6

C-BOX 150 can perform Backup/Restore of a whole cluster under the following

conditions:

• the Master/Slave network is composed of one master and up to 9

Slaves maximum

• the Master/Slave network must be either Synchronized or Multidata

• the A.S.R. mode must be disabled