Datalogic Scanning C-BOX 300, C-BOX 310 - page 31

INSTALLATION 2
GET – (left button): the C-BOX 3X0 reads the current scanner configuration and
permanently copies it in its own memory support (EEPROM). The C-BOX
3X0 preserves this configuration also when switched off.
TEST - (center button): the C-BOX 3X0 forces the scanner to run the Test
Operating Mode (refer to the scanner Installation Manual for details).
Press any button to quit the Test Operating Mode and restore the scanner
normal operating mode.
SEND - (right button): the C-BOX 3X0 sends the configuration previously stored in
its own permanent memory support to the scanner’s EEPROM.
NOTE
Once the buttons are released in step 1, a ten-second timeout starts.
If no button is pressed within this time (no function is selected), the
procedure will be cancelled.
The C-Box 300 warning LED (Figure 16) is turned OFF at the end of
each procedure.
The C-BOX 310 display visualizes self-explaining messages about
GET/TEST/SEND functions.
19