TECHNICAL FEATURES
9.1INDICATORS
9.1.1Gryphon™ D432/D432E LED Indicators
The Gryphon™ D432/D432E has one green LED indicator signaling the following reader functions:
STATUS | BEHAVIOR |
Power ON | The LED lights up for 2 seconds to signal the |
| power supply is present. |
Power ON with USB (without The LED blinks until the Host accepts the device. external power supply)
Normal Function | The LED lights up after a good decoding and will |
| switch off only at the next trigger press. |
9.1.2Beeper
The Gryphon™ D432/D432E basic software provides beeper signals for good/wrong reading and for indicating errors. Its tone, volume and duration can be directly configured by using the codes given on page 65.
The application program can also manage the beeper (User Defined Beeper) when the reader is controlled by a Host PC. It is possible to activate the beeper by sending a command from the Host to the reader via the current communication interface.
The configuration of the User Defined Beeper does not influence or change the functioning of the beeper managed by the Gryphon™ D432/D432E basic software.
NOTE
9.1.3Good Read Spot
It is possible to enable a green
125