GRYPHON™ D432/D432E
A HOST CONFIGURATION STRINGS
In this section we provide a description of how to modify the device configuration using serial strings sent from the Host.
This method requires the RS232,
interface.
The device configuration can be changed by receiving commands from the Host through the current interface. When this method is used, the programming sequence format is the following:
$+ Command $- CRCarriage return character (0D Hex.)
Exit and Save configuration
Character sequence in following tables Enter configuration environment
Example:
$+ GBB1 GBA1 $- CR
Carriage return character (0D Hex.)
Exit and save new configuration
Beeper tone 1
Beeper low intensity
Enter configuration environment
Each configuration parameter setting removes the condition previously active for that parameter.
| Configuring some configuration commands, such as those of |
| advanced formatting, through strings may result very complex. For this |
| reason they are not provided in the following tables but can be |
NOTE | configured by using VisualSetup configuration program or referring to |
the related section in chapter 5 of this manual. |
126