GRYPHON™ D432/D432E
Configuration Field | Default Setting |
Data Matrix |
|
Selection | Enabled - normal & inverted |
Rectangular Style | Enabled |
Minimum Code Length | 0001 |
Maximum Code Length | 3600 |
QR |
|
Selection | Enabled |
Postal Codes |
|
Selection | Disabled |
Maxicode |
|
Maxicode Mode 1 | Disabled |
Maxicode Mode 2 | Disabled |
Maxicode Mode 3 | Disabled |
Maxicode Mode 4 | Disabled |
Maxicode Mode 5 | Disabled |
Maxicode Mode 6 | Disabled |
Composite Codes |
|
Selection | Disabled |
Discard Linear Part | Enabled |
Reading Parameters |
|
Trigger Mode | Trigger level |
Trigger Type | Normal trigger |
Flash ON | 2 sec |
Flash OFF | 2 sec |
Beeper Tone | Tone 1 |
Beeper Volume | High volume |
Beeper Duration | 50 ms |
Reads per Cycle | One read per cycle |
Scan Timeout | 5 sec |
Aiming System Delay | Disabled |
Good Read Spot | Disabled |
User Defined Beeper Tone | Tone 1 |
User Defined Beeper Volume | High Volume |
User Defined Beeper Duration | 100 ms |
Codes per Scan | One code per scan |
Central Code Transmission | Enabled |
Order by Code Length | Disabled |
Order by Code Symbology | Disabled |
Autoscan Mode | Disabled |
Autoscan Aiming System | Enabled |
20