Datalogic Scanning F732 user manual Connection to the Host Computer, 1 RS-232 Connection

3 F732 WIZARD™

3.2CONNECTION TO THE HOST COMPUTER

Before proceeding with this phase, make sure that both the computer and the F732 terminal are switched off.

CAUTION

3.2.1RS-232 Connection

To connect the F952 cradle to the host computer, proceed as indicated below:

1- Connect the serial port of the host computer to cable 94A054000 for 9-pin connections or to cable 94A054010 for 25-pin connections;

2- Connect the other end of the same cable (RJ connector) to the RS-232 port of the cradle (point C in the previous figure);

3- Insert the power-supply plug into the jack on the base of the cradle (point D in the previous figure);

4- Attach the power supply to a power outlet

5- Turn on the cradle (point A in the previous figure) and the computer.

6- Put the F732 terminal into the cradle and, if necessary, wait for battery recharging.

16 Ed.: 06/01