Datalogic Scanning When the F732 terminal display window, shows the message BATTERY LOW

5 F732 WIZARD™

Recharging should be made after using the terminal until the batteries are nearly flat.

	When the F732 terminal display window
	shows the message "BATTERY LOW",
	wait until the F732 terminal is turned off
ATTENTION	before inserting it in the cradle.

Recharge the terminal by simply inserting it into its cradle; Datalogic S.p.A. recommends a minimum uninterrupted recharging time of eight hours.

When batteries are new, or have not been recharged for a long time, it is necessary to perform two or three charge and discharge cycles (with complete use) before the batteries are able to reach their maximum capacity.

While the batteries are recharging, the color of the LED on the cradle changes from red to green. This switching takes place when 70- 80% of the complete charge is reached.

NOTE

	If the terminal remains inactive for a
	prolonged period such as two weeks, it
	is advisable to download all the stored
ATTENTION	data onto a computer and extract the
	battery pack.

26 Ed.: 06/01