Mounting Options
Figure 9. Installing the Mobile Dock Assembly on the Mount
Ram Ball |
|
Ram Ball | Adjustment |
Assembly | Knob |
2.Loosen the Adjustment Knob slightly to tilt the Mobile Dock to the desired mounting angle.
3.Route and connect all cables (see “Power and Peripheral Device Connec- tions” starting on page 17 for more on connections). If you haven’t already prepared the power connection, reference “Electrical Consider- ations” starting on page 5 for wiring information.
Inserting/Removing the Pegaso
Inserting the Pegaso in the Dock
To insert a Pegaso into the Powered Mobile Dock, perform the following steps:
1.Slide the Pegaso into the Powered Mobile Dock.
2.Push gently downwards to insert the Pegaso until it is firmly seated in the Dock.
14 | Pegaso™ Powered Mobile Dock |
