Datalogic Scanning Pegaso manual Power and Peripheral Device Connections, Connections on the Dock

Chapter 4

Power and Peripheral

Device Connections

This chapter describes connection of peripheral devices that are provided with or available for the Pegaso PMD system. For more on power connections, see “Electrical Considerations” starting on page 5.

Connections on the Dock

Figure 12 shows the connection located on the bottom of the dock. See the following pages for more information about these connections.

Figure 12. Cable Connections

USB OTG port

COM port

Input Power connection

Power Connection

Insert the DC power cord at the power port on the bottom of the dock. When power is applied to the dock, the Power-On LED will light.

Installation Guide 17