GAS REQUIREMENTS

STEP 5: GAS CONVERSION

Verify the type of gas supplied to the location. The cook- top is shipped from the factory set up and adjusted for nat- ural gas. The unit can be readily converted to LP as described below.

Natural Gas Requirements:

Connection: 1/2” N.P.T.

Pressure: 6” to 14” Water Column

A manual shut off valve must be installed before the regulator.

LP Gas Requirements:

Pressure: 11” to 14” Water Column

A regulator is required at the LP source to provide a maxi- mum of 14” W.C. to the cooktop regulator.

LP CONVERSION:

If propane is desired you must obtain a conversion kit from the factory for more information on type of conver- sion kit needed. Call Parts and Service (888) 281-

5698

HOOK UP:

Make sure the gas supply is turned off at the wall valve before connecting the appliance. All gas supply connec- tions should be made by a qualified technician and in accordance with local codes or ordinances. In the absence of a local code, the installation must conform to the National Fuel Gas Code ANSI 223.1-1984.

Install the 1/2” coupling to the gas inlet at the left rear cor- ner of the unit. Next, install the 1/2” close nipple and reg- ulator (See Fig.11). When installing the regulator, be sure to have the arrow on the regulator body pointing towards the cooktop inlet. Only use sealant which is resistant to the actions of LP. gases.

To operate, push and turn the burner control knob to the lite position. The gas flowing to the pilot burner will be ignited by the electric spark igniter. The audible clicking signal is an indication that the igniter is functioning. The appliance is equipped with a safety valve which will take about 30 seconds to heat up before allowing the main burner to come on, once ignited rotate the dial to the desired setting.

CAUTION:

The appliance must be isolated from the buildingsgas sup-

ply piping system by closing its individual manual shut-off

valve during any pressure testing of the gas supply piping

system at test pressure equal to or less than 1/2 psig (3.5

kPa.).

When checking the cooktop manifold gas pressure, the inlet pressure to the regulator should be at least 6.0” W.C. for natural gas or 11.0” for LP.

7

Page 8
Image 8
DCS C-24W installation manual GAS Requirements, GAS Conversion, LP Conversion, Hook UP

C-24W specifications

The DCS C-24W is a versatile and highly capable multi-role combat aircraft designed for modern warfare. This aircraft has garnered attention for its advanced features and specifications that cater to contemporary military needs. The C-24W is primarily designed for both air-to-air and air-to-ground missions, making it a formidable asset in any air force.

One of the main features of the C-24W is its powerful propulsion system, which consists of twin turbofan engines that provide exceptional speed and agility. The aircraft is capable of quick ascents and high-speed maneuvers, enabling it to evade enemy threats while engaging in combat. The engine design also allows for reduced fuel consumption, which translates to a longer operational range and increased mission versatility.

The C-24W boasts a cutting-edge avionics suite, integrating advanced digital fly-by-wire technology, allowing for precise control and enhanced safety. The cockpit is equipped with a state-of-the-art digital display system that provides pilots with real-time data on aircraft systems, terrain mapping, and enemy targets. The integration of artificial intelligence assists in combat decision-making, improving situational awareness and response time.

One of the standout characteristics of the C-24W is its stealth capabilities. The aircraft features a low observable design, which minimizes its radar signature, enabling it to conduct missions deep into enemy territory without being detected. This strategic advantage is further enhanced by its electronic warfare systems, capable of jamming enemy radar and communication systems, ensuring that the aircraft remains undetected while carrying out its objectives.

For armament, the C-24W can carry a diverse range of munitions, including air-to-air missiles, precision-guided bombs, and a variety of other ordinance types. This flexibility allows the aircraft to adapt to different mission requirements, making it effective in both air superiority and ground attack roles.

In terms of survivability, the C-24W is equipped with advanced countermeasure systems that provide protection against enemy missiles and fire. These advanced systems enhance not only the aircraft's longevity but also the success of the missions it undertakes.

Overall, the DCS C-24W is an impressive and sophisticated aircraft that reflects modern technological advancements. Its combination of speed, stealth, advanced avionics, and extensive weaponry makes it a critical component for any air combat strategy, ready to meet the challenges of today’s evolving battlefield.