Using your C/L/R 2300s as Rear Surrounds
C/L/R 2300s can be used as exceptional quality rear surround speakers. If you use them as rear surrounds, simply hook them up normally to the rear surround amplifier outputs and set your bass management system to “Large” left and right surrounds.
Using your C/L/R 2300s in a Stereo System
If you are using a pair of C/L/R 2300s also as the main left and right speakers in a stereo system, hook them up to the left and right channel amplifier outputs as described in the preceding section. If you are using a Dolby Digital receiver set the base management system to “Large” left & right main front speakers and “No” sub.
Setting Bass and Treble Controls on Your Receiver or Amplifier
Normally we recommend that you set the Bass and Treble controls on flat or 0 dB. This will give you the most linear and natural sound. If you want more bass, raise the subwoofer level control on your C/L/R 2300, keeping in mind that even a little turn of the knob can make a big difference in the sound. Also, if your amplifier or receiver has a graphic equalizer, we recom- mend that you leave it flat. The reason for this is that we have spoken with many consumers about what they thought were improperly sounding speakers when in fact the problem was misadjusted tone controls. When in doubt, leave them flat; this almost always sounds the best.
Powering Up the Active Subwoofer Section
Your C/L/R 2300(s) contains a
7