Controls |
Ceramic glass cooktop
1.Cooking zone Hi Light front left
2.Cooking zone Hi Light rear left
3.Cooking zone Hi Light rear right
4.Cooking zone Hi Light front right
5.Hob controls
Hob control elements
A.On/Off sensor
B.Cooking zone power indicators (Hot surface indicators)
C.Cooking zone selection and (+) Sensor
D.
E.Extension zone On/Off sensor
F.Extension zone indicator light
Hob control
•
•
•
•
The hob is fitted with electronic sensors which are activated when the relevant circular touch pad is pressed for at least one second.
Each sensor activation is followed by an audible tone.
To avoid false touch pad activations do not place any objects on the touch pad area. Always keep the touch pad surface area clean.
Switching a cooking zone on
•Press the on/off sensor (A) for at least one second to switch the hob on, all hotplate power indicators (B) indicate ‘0’. The next setting must be selected within 20 seconds to prevent the hob from switching off.
•Activate the required cooking zone by pressing the relevant (+) sensor (C)
•Set the desired cooking power from 1- 9, using the (+) or
•Continuous pressing of + (C) or - (D) increases or reduces the power level.
•Alternatively, power levels may be sequentially adjusted by pressing (C or D) for at least 1 second.
•Note that settings are only possible for one hotplate at a time.
PAGE 6 OF 12
