Pioneer DEH-50UB Switching Auto PI Seek, Switching the warning tone, Setting the rear output and

Section
04		Initial Settings
	Switching Auto PI Seek		range speaker (REAR SP :FULL/
	The unit can automatically search for a differ-		PREOUT:REAR) or subwoofer
			(REAR SP :SUB W/PREOUT:SUB W) connec-
	ent station with the same programming, even
			tion. If you switch the rear output setting to
	during preset recall.
			REAR SP :SUB W, you can connect a rear
	1 Use MULTI-CONTROL to select AUTO PI.		speaker lead directly to a subwoofer without
			using an auxiliary amp.
	2 Press MULTI-CONTROL to turn Auto PI		Initially, the unit is set for rear full-range speak-
	seek on.		er connection (REAR SP :FULL). When rear
	# To turn Auto PI seek off, press		output is connected to full range speakers
	MULTI-CONTROL again.		(when REAR SP :FULL is selected), you can
			connect the RCA subwoofer output to a sub-
			woofer. In this case, you can select whether to
	Switching the warning tone		use the subwoofer controller’s (low pass filter,
	If the front panel is not detached from the		phase) built-in PREOUT:SUB W or the auxili-
			ary PREOUT:REAR.
	head unit within four seconds of turning off
	the ignition, a warning tone sounds. You can		1 Use MULTI-CONTROL to select
	turn off the warning tone.		SW CONTROL.
	1 Use MULTI-CONTROL to select		2 Press MULTI-CONTROL to display the
	WARNING TONE.		setting mode.
	2 Press MULTI-CONTROL to turn warning		# Press BACK to return to the previous display.
	tone on.		3 Press MULTI-CONTROL to select the seg-
	# To turn warning tone off, press		ment you wish to set.
	MULTI-CONTROL again.		Press MULTI-CONTROL repeatedly to switch
			the segment in the following order:
			REAR SP (rear speaker setting)—PREOUT
	Switching the auxiliary setting		(RCA output setting)
	It is possible to use auxiliary equipment with		4 Use MULTI-CONTROL to select the de-
	this unit. Activate the auxiliary setting when		sired setting.
	using auxiliary equipment connected to this		Turn to change the setting.
	unit.		When REAR SP (rear speaker setting) is se-
	1 Use MULTI-CONTROL to select AUX.		lected.
			REAR SP :SUB W (subwoofer)—
	2 Press MULTI-CONTROL to turn AUX on.		REAR SP :FULL (full-range speaker)
			When PREOUT (RCA output setting) is se-
	# To turn AUX off, press MULTI-CONTROL
			lected.
	again.
			PREOUT:SUB W (subwoofer)—
			PREOUT:REAR (full-range speaker)
	Setting the rear output and		# When no subwoofer is connected to the rear
			output, select REAR SP :FULL.
	subwoofer controller		# When a subwoofer is connected to the rear
	This unit’s rear output (rear speaker leads out-		output, set for subwoofer REAR SP :SUB W.
	put and RCA rear output) can be used for full-

28 En