Installation Conditions
3.4.2 Factory default setting
Figure 3.11 shows the default setting position at the factory.
Open
Figure 3.11 Factory default setting
3.4.3 Master drive-slave drive setting
Master device (device #0) or slave device (device #1) is selected.
|
| Open | ||
|
|
|
|
|
1 |
| C |
| A |
|
| |||
2 |
|
|
|
|
|
|
| D |
|
| B |
| |
| Open | |||||
|
| |||||
| (a) | Master drive | ||||
1 | C A |
Open | Short |
2 D B
(b) Slave drive
Figure 3.12 Jumper setting of master or slave device
Note:
Pins A and C should be open.
