3.2 Mounting
(2) Frame
The MR head bias of the HDD disk enclosure (DE) is zero. The mounting frame is connected to SG.
Use M3 screw for the mounting screw and the screw length should satisfy the specification in Figure 3.3.
The tightening torque must be 5 kgcm.
When attaching the HDD to the system frame, do not allow the system frame to touch parts (cover and base) other than parts to which the HDD is attached.
(3) Limitation of mounting
Do not use the center hole. For screw length, see Figure 3.3.
Note) |
| These dimensions are recommended values; if it is not possible to | |||
|
| satisfy them, contact us. |
|
|
|
|
|
|
|
|
|
|
| 2.5 |
| Side surface | 2.5 |
Bottom surface mounting |
| mounting |
| ||
|
|
| |||
| DE | 2.5 |
|
|
|
| 2.5 |
|
|
| |
|
|
|
|
| |
2 |
|
| PCA | B | |
A |
|
| |||
| Frame of system |
| |||
Frame of system |
| cabinet |
|
|
|
cabinet |
|
|
|
|
|
3.0 or less |
| Screw |
Screw | 3.0 or less |
Details of A
Details of B
