Fujitsu MHK2090AT, MHK2120AT, MHK2060AT manual Information to be read by Identify Device command 5

Interface

Table 5.4 Information to be read by IDENTIFY DEVICE command (5 of 8)

	Bit 0 = 1 Mode 3
*9 WORD 80
Bit 15-6:	Reserved
Bit 5:	ATA/ATAPI-5 supported = 1
Bit 4:	ATA/ATAPI-4 supported = 1
Bit 3:	ATA-3 supported = 1
Bit 2:	ATA-2 supported = 1
Bit 1-0:	Undefined
*10 WORD 82
Bit 15:	Undefined
Bit 14:	'1' = Supports the NOP command.
Bit 13:	'1' = Supports the READ BUFFER command.
Bit 12:	'1' = Supports the WRITE BUFFER command.
Bit 11:	Undefined
Bit 10:	'1' = Supports the Host Protected Area feature set.
Bit 9:	'1' = Supports the DEVICE RESET command.
Bit 8:	'1' = Supports the SERVICE interrupt.
Bit 7:	'1' = Supports the release interrupt.
Bit 6:	'1' = Supports the read cache function.
Bit 5:	'1' = Supports the write cache function.
Bit 4:	'1' = Supports the PACKET command feature set.
Bit 3:	'1' = Supports the power management feature set.
Bit 2:	'1' = Supports the Removable Media feature set.
Bit 1:	'1' = Supports the Security Mode feature set.
Bit 0:	'1' = Supports the SMART feature set.
*11 WORD 83
Bits 15-7:	Undefined
Bit 6:	'1' = When the power is turned on, spin is started by the SET
	FEATURES sub-command.

5-36 C141-E088-01EN