Fujitsu MHJ2181AT, MHK2120AT, MHK2090AT, MHK2060AT manual Contents

Contents

CHAPTER 3 Installation Conditions					3-1
3.1	Dimensions	3-2
3.2	Mounting	3-4
3.3	Cable Connections			3-9
3.3.1	Device connector			3-9
3.3.2	Cable connector specifications				3-10
3.3.3	Device connection			3-10
3.3.4	Power supply connector (CN1)				3-11
3.4	Jumper Settings		3-11
3.4.1	Location of setting jumpers 3-11
3.4.2	Factory default setting 3-12
3.4.3	Master drive-slave drive setting				3-12
3.4.4	CSEL setting		3-13
CHAPTER 4 Theory of Device Operation					4-1

4.1 Outline 4-2

4.2Subassemblies 4-2

4.2.1Disk 4-2

4.2.2Head 4-2

4.2.3Spindle 4-3

4.2.4Actuator 4-3

4.2.5	Air filter 4-3
4.3	Circuit Configuration	4-4
4.4	Power-on Sequence	4-6
4.5	Self-calibration 4-7
4.5.1	Self-calibration contents 4-7
4.5.2	Execution timing of self-calibration 4-8
4.5.3	Command processing during self-calibration 4-9
4.6	Read/write Circuit	4-9

x C141-E088-01EN