Fujitsu MHK2060AT, MHK2120AT, MHK2090AT, MHJ2181AT manual Host Commands

		5.3 Host Commands
	Self-test	Meaning
	execution status
0		Self-test has been completed normally or has not been
		executed.
1		Self-test has been stopped by the host computer.
2		Self-test has been suspended by hard or soft reset.
	3	Self-test has been aborted by a fatal error.
4		Self-test has been completed abnormally by an unknown
		meaning.
5		Self-test has been completed abnormally by write test.
6		Self-test has been completed abnormally by serbo test.
7		Self-test has been completed abnormally by read test.
	8 to 14	Reserved
15		Self-test is in progress.

∙Off-line data collection capability

Indicates the method of off-line data collection carried out by the drive. If the off-line data collection capability is 0, it indicates that off-line data collection is not supported.

Bit Meaning

0Indicates that Execute Off-Line Immediate is supported.

1Vendor unique

2Indicates that off-line data collection being executed is aborted when a new command is received.

3Indicates that supports off-line read scan function.

4Indicates that supports self-test function.

∙

∙

Failure prediction capability flag

Bit 0: The attribute value data is saved to a media before the device enters power saving mode.

Bit 1: The device automatically saves the attribute value data to a media after the previously set operation.

Bits 2 to 15: Reserved bits

Error logging capability

Bit 0: Indicates that error logging function.

Bits 1 to 7: Reserved bits

C141-E088-01EN 5-65