Fujitsu MHK2090AT, MHK2120AT, MHK2060AT, MHJ2181AT manual Contents

Contents

Table 3.2	Cable connector specifications		3-10
Table 4.1	Self-calibration execution timechart			4-9
Table 4.2	Write precompensation algorithm			4-10
Table 5.1	Signal assignment on the interface connector				5-3
Table 5.2	I/O registers 5-7
Table 5.3	Command code and parameters		5-14
Table 5.4	Information to be read by IDENTIFY DEVICE command						5-
	32
Table 5.5	Features register values and settable modes				5-40
Table 5.6	Diagnostic code	5-47
Table 5.7	Features Register values (subcommands) and functions						5-58
Table 5.8	Format of device attribute value data			5-62
Table 5.9	Format of insurance failure threshold value data					5-62
Table 5.10	SMART error log data format		5-66
Table 5.11	SMART self test log data format		5-68
Table 5.12	Contents of security password		5-70
Table 5.13	Contents of SECURITY SET PASSWORD data					5-74
Table 5.14	Relationship between combination of Identifier and Security
	level, and operation of the lock function 5-74
Table 5.15	Command code and parameters		5-77
Table 5.16	Parallel generation equation of CRC polynomial					5-99
Table 5.17	Recommended series termination for Ultra DMA					5-100
Table 5.18	Ultra DMA data burst timing requirements				5-105
Table 6.1	Default parameters	6-7

xvi C141-E088-01EN