+30sec
The +30sec function allows the oven to being cooking immediately on full power.
The +30sec button has been
1.Press START/+30sec button.
The oven will be “ : 30” is displayed. M/W indicator lights.
And the oven will start immediately. No need to press START/+30sec button. The oven light comes on and the turn table starts rotaing and the time in the display will count down in seconds.
TO STOP THE OVEN WHILE THE OVEN IS OPERATING
1.Open the door.
•Oven stops operating.
•You can restart the oven by closing the door and touching START/+30sec button.
2.Press the STOP/Clear button.
•Oven stops operating.
•If you wish to cancel the cooking settings, press the STOP/Clear button again.
STAND-BY POWER "0"
This function is used for saving energy.
To set
“ : 0” appears in the display.
2. Press and hold the STOP/CLEAR button until display is turned off.
3.To cancel the
The oven is again available for normal use.
ABNORMAL MESSAGE
• If the inside temperature of the oven is higher than expected or the temperature sensor doesn't work properly, “Err 2” message will be shown in the display.
• Unplug the power and call our technical service.
• When the temperature sensor is disconnected, “Err 3” message will be shown in the display.
• Unplug the power and call our technical service.
WARNING
If you see arcing, press STOP/CLEAR button and correct the problem.
Arcing is the microwave term for sparks in the oven. Arcing is caused by:
a)Metal or foil touching the side of the oven.
b)Foil not molded to food (upturned edges act like antennas).
c)Metal, such as
d)Recycled paper towels containing small metal pieces being used in the microwave.
24