Curtain Wall Console Installation Instruction
95 | 815 |
| 810 |
| 405 |
| WALL |
| SLEEVE |
60
410
WALL APERTURE
PRIOR TO INSTALLATION
•Remove Front Inlet Grille and store in a safe place.
•Remove both Filter Assemblies and store with the front inlet grille.
•Remove the two screws securing the Front Cover assembly to the Chassis Assembly.
•Remove the Front Cover assembly
•Two mounting holes, located on the Condenser Back Cover, are now exposed and clearly visible.
•Isolate the area and be sure not to contaminate the Electrical components with dust.
FILTER ASSEMBLY
FRONT INLET GRILLE
FRONT COVER ASSEMBLY
ELECTRICAL CONNECTION
•Ensure that the supply voltage is 230V 50 Hz
•This unit must be earthed and installed in accordance with local municipal safety standards.
•If necessary, ensure that a qualified electrician replaces the mains cable.