w w w . d e l l . c o m s u p p o r t . d e l l . c o m
7 | Keystone adjustment | If your image is not perpendicular to the screen, |
|
| then it does not appear square. Press to adjust |
|
| image distortion caused by tilting the projector |
|
| (±16 degrees). |
|
|
|
8 | Resync | Press to synchronize the projector to the input |
|
| source. Resync does not operate if the OSD is |
|
| displayed. |
|
|
|
9 | Source | Press to toggle through Analog RGB, Composite, |
|
| |
|
| when multiple sources are connected to the |
|
| projector. |
|
|
|
10 | Directional keys | Use the or button to select OSD items, use |
|
| the or button to make adjustments. |
|
|
|
11 | Previous Page | Press to go to the previous page. |
|
| NOTE: The USB cable must be connected to |
|
| use this function. |
|
|
|
12 | Power | Turn the projector on and off. For more |
|
| information, see "Turning Your Projector On" on |
|
| page 11 and "Turning Your Projector Off" on |
|
| page 11. |
|
|
|
Using the On-Screen Display
The projector has a
In the Main Menu, press the or button on the control panel or the or button on the remote control navigate through the tabs. Press the button on the control panel or the Menu button on the remote control to select a submenu.
In the submenus, press the or button on the control panel or the or button on the remote control to make a selection. When an item is selected, the color changes to dark gray. Use the or button on the control panel or the or button on the remote control make adjustments to a setting.
To exit the OSD, go to the Exit tab and press the button on the control panel or the Menu button on the remote control.
18
Using Your Projector