w w w . d e l l . c o m s u p p o r t . d e l l . c o m
Using the Control Panel
4
3
2
1
5
6
7
8
1 | Power | Turn the projector on and off. For more information, | |
|
| see "Turning Your Projector On" on page 11 and | |
|
| "Turning Your Projector Off" on page 11. | |
|
|
| |
2 | Source | Press to toggle through Analog RGB, Composite, | |
|
| ||
|
| multiple sources are connected to the projector. | |
|
|
|
|
3 | Four Directional | The four directional keys | can be used to |
| Keys | toggle through the tabs in the OSD. |
|
4TEMP warning light • A solid orange TEMP light indicates that the projector has overheated. The display automatically shuts down. Turn the display on again after the projector cools down. If the problem persists, contact Dell.
•A blinking orange Temp light indicates that a projector fan has failed and the projector automatically shuts down. If this problem persists, contact Dell.
5LAMP warning light If the Lamp light is solid orange, replace the lamp.
6 | Keystone adjustment | If your image is not perpendicular to the screen, then it |
|
| does not appear square. Press to adjust image distortion |
|
| caused by tilting the projector. (±16 degrees) |
|
|
|
7 | Resync | Press to synchronize the projector to the input source. |
|
| Resync does not operate if the |
|
| is displayed. |
|
|
|
16
Using Your Projector