Dell 130T manual Interface Connection and Power

Figure 2. Interface Connection and Power

Interface Connection and Power

Item	Parts Description
Number

1Power Receptacle

2Tape Drive Interface Connector

3Thumbscrew (2x)

2.Disconnect the power cable from the tape drive.

CAUTION: Disconnect the tape drive interface cable (P980-P983), as described in the next step, before removing the tape drive. Make sure the cable is out of the tape drive bay by removing it from the rectangular hole to prevent the cable from being damaged.

3.Disconnect the tape drive interface cable from the tape drive.

NOTE: The tape drive interface cable (P980-P983) markings face the rear of the tape drive. Note this orientation when reinstalling the drive interface cable. The connector is keyed but it is still possible to insert it incorrectly.

4.Disconnect the SCSI cable connectors and/or terminator from the rear of the drive. Save the old terminator, if any.

Drive Tray Conversion Instructions 3