Back to Contents Page
Memory
Dell™ Vostro™ 1320 Service Manual
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing Memory Modules
NOTE: DIMM A is the module closest to the system board. You cannot remove DIMM A until DIMM B is removed. If only 1 DIMM is installed, it should always be installed in the DIMM A slot. If only 1 DIMM is installed, moving memory from DIMM A to DIMM B will disable AMT (if currently enabled).
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove the battery from the computer.
3.Remove the access panel from the computer.
4.For each memory module present in your computer, use your fingertips carefully to spread apart the securing clips on each end of the memory module connector until the memory module pops up.
