Back to Contents Page

Coin-Cell Battery

Removing the Coin-Cell Battery

Replacing the Coin-Cell Battery

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer.

CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.

Removing the Coin-Cell Battery

1.Follow the procedures in Before You Begin.

2.Remove the system board (see Removing the System Board).

3.Turn the system board over.

4.Use a plastic scribe to push the coin-cell battery upward to release it from the slot.

1

system board

2

coin-cell battery

 

 

 

 

 

 

3

plastic scribe

 

 

 

 

 

 

 

 

 

 

 

 

 

Replacing the Coin-Cell Battery

1.Follow the procedures in Before You Begin.

2.Replace the coin-cell battery with the positive (+) side facing upwards.

3.Replace the system board (see Replacing the System Board).

Back to Contents Page

Page 13
Image 13
Dell 1458, 1457 manual Removing the Coin-Cell Battery, Replacing the Coin-Cell Battery