Back to Contents Page
Battery
Removing the Battery
Replacing the Battery
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, you must remove the battery from the battery bay before you begin working inside the computer.
CAUTION: To avoid damage to the computer, use only the battery designed for this particular Dell™ computer. Do not use batteries designed for other Dell computers.
Removing the Battery
1.Follow the procedures in Before You Begin.
2.Turn the computer over.
3.Slide the battery release latch until it clicks into place.
4.Slide the battery out of the battery bay.
1 | battery | 2 | battery release latch |
|
|
|
|
|
|
|
|
|
|
|
Replacing the Battery
To replace the battery, slide the battery into the battery bay until it clicks into place.
