9. Use the pull tab to disconnect the bottom flex-cable connector from the invertor connector.
10. Lift the tape securing the top flex-cable connector and gently pull to disconnect the top flex-cable connector from the display locking connector.
Replacing the Display Panel
1. Follow the instructions in Before You Begin.
2. Connect the top flex-cable connector to the display connector.
3. Connect the bottom flex-cable connector to the inverter connector.
4. Align the screw holes on the display panel with the corresponding screw holes and guide pins on the top cover.
5. Gently lower the display panel into place and replace the two screws that secure the display panel to the cover.
6. Replace the eight screws (four on each side of the display panel) to secure the display brackets to the display panel.
7. Replace the display bezel (see Replacing the Display Bezel).
8. Replace the display assembly (see Replacing the Display Assembly).
9. Replace the keyboard (see Replacing the Keyboard).
1
display panel
2
screws (8)
1
display panel
2
top flex-cable connector
3
bottom flex-cable connector
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.