Dell 1525, 1526 Replacing the Palm Rest


11. Moving from left to right, carefully lift the palm rest along the rear edge, near the hinge brackets, then gently lift the palm rest to remove it from the
computer.

Replacing the Palm Rest


1. Align the palm rest with the base of the computer and gently snap it into place.

2. Connect the touch pad connector and the device status lights LED connector to the system board.

3. Replace the two screws on the top of the palm rest.

4. Turn the computer over and replace the nine screws on the bottom of the computer to secure the palm rest.
Back to Contents Page

1
screws (2)
2
palm rest
3
touch pad connector
4
device status lights LED connector
5
display hinge screw


CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.