1 | LAMP warning light | If the LAMP amber indicator is on or blinking, | |
|
|
| one of the following problems could be occurring: |
|
|
| • Lamp is reaching its end of usable life |
|
|
| • Lamp module is not properly installed |
|
|
| • Lamp driver failure |
|
|
| • Color wheel failure |
|
|
| For more information, see "Troubleshooting Your |
|
|
| Projector" on page 61 and "Guiding Signals" on |
|
|
| page 65. |
|
|
| |
2 | TEMP warning light | If the TEMP amber indicator is on or blinking, | |
|
|
| one of the following problems could be occurring: |
|
|
| • Internal temperature of the projector is too |
|
|
| high |
|
|
| • Color wheel failure |
|
|
| For more information, see "Troubleshooting Your |
|
|
| Projector" on page 61 and "Guiding Signals" on |
|
|
| page 65. |
|
|
|
|
3 | Power |
| Turns the projector on or off. For more |
|
|
| information, see "Turning Your Projector On" on |
|
|
| page 19 and "Turning Your Projector Off" on |
|
|
| page 19. |
|
|
|
|
4 | Up | / Keystone | Press to navigate through the |
| adjustment | (OSD) Menu items. | |
|
|
| Press to adjust image distortion caused by tilting |
|
|
| the projector |
|
|
|
|
5 | Right | / Auto | Press to navigate through the |
| Adjust~ | (OSD) Menu items. | |
|
|
| Press to synchronize the projector to the input |
|
|
| source. |
|
|
| NOTE: Auto Adjust does not operate if the on- |
|
|
| screen display (OSD) is displayed. |
|
|
| |
6 | IR Receiver | Point the remote control towards the IR receiver | |
|
|
| and press a button. |
|
|
|
|
24
Using Your Projector