![Manual background](/images/new-backgrounds/14541/1454185x1.webp)
on the control panel or press Enter button on the remote control to delete the captured picture and set back to the default setting.
AUDIO on the control panel or press Enter button on the remote control to change audio settings. The audio settings menu consists of the following options:
AUDIO
to decrease the volume and
to increase the volume.
POWER on the control panel or press Enter button on the remote control to activate power settings. The power settings menu consists of the following options:
POWER
You can also set a different delay period to enter power saving mode. The delay period is the time you want the projector to wait without an input signal. Power saving can be set to 30, 60, 90, or 120 minutes.
Using Your Projector
43