Dell 1710 Replacing the Hinge Cover

Replacing the Hinge Cover


This procedure assumes that you have completed the removal procedure Removing the Hinge Cover.

1. Align the two tabs underneath both edges of the hinge cover with the corresponding notches in the computer.

2. Moving from left to right, press down until the hinge cover snaps into place.

3. Close the display and turn the computer to the back.

4. Press each hinge cover until it snaps into place.
Back to Contents Page

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions that shipped with your computer.
NOTICE: The hinge cover is fragile and can be damaged if extreme force is used. Exercise care when replacing the hinge cover.