Dell 1710 Speaker Assembly

Back to Contents Page
 Speaker Assembly
Dell™Vostro™1710
Service Manual
Removing the Speaker Assembly
Replacing the Speaker Assembly
Removing the Speaker Assembly


1. Follow the instructions in Before Working on Your Computer.

2. Remove the hard-drive cover. See Removing the Hard Drive for an illustration of the hard drive cover.

3. Remove the WLAN card (see Removing a WLAN Card).

4. Remove the hinge cover (see Removing the Hinge Cover).

5. Remove the keyboard (see Removing the Keyboard).

6. Remove the display assembly (see Removing the Display Assembly).

7. Remove the palm rest (see Removing the Palm Rest).

8. Remove the system board (see Removing the System Board Assembly).

9. Remove the two M2 x 3-mm screws from the speaker assembly.

10. Remove the speaker assembly.
Replacing the Speaker Assembly

This procedure assumes that you have completed the removal procedure Removing the Speaker Assembly.

1. Align the guide holds in the speaker assembly with the guide posts on the base of the computer, then lower the assembly into place.

2. Replace the two M2.0 x 3-mm screws to secure the speaker assembly

3. Replace the palm rest (see Replacing the Palm Rest).

4. Replace the display assembly (see Replacing the Display Assembly).

5. Replace the keyboard (see Replacing the Keyboard).

CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1
M2.0 x 3-mm screws (2)
2
speaker connector
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.