Dell 1710 - page 42

This procedure assumes that you have completed the removal procedure Removing the Power Button and Multimedia Button Pads.

1. Connect the power-button pad cable in the connector on the bottom of the multimedia button pad.

2. Replace the power button pad, positioning it under the tabs on the palm rest and aligning the screw hole.

3. Gently reinsert the multimedia-button pad cable underneath the palm rest.

4. Slide the multimedia button pad to the right, aligning it under the tabs on the palm rest and aligning the screw hole.

5. Replace the M2 x 3-mm screw that secures the power button pad to the palm rest.

6. Replace the M2 x 3-mm screw that secures the multimedia button pad to the palm rest.

7. Connect the multimedia-button pad cable to the connector on the system board.

8. Replace the keyboard (see Replacing the Keyboard).

9. Replace the hinge cover (see Replacing the Hinge Cover).
Back to Contents Page
