3Turn the computer over and open the display as far as possible.
4Pull the pull-tab to disconnect the display cable and LAN-USB cable from the connectors on the system board.
5Disconnect the speakers cable from the system-board connector.
6Remove the screws that secure the system-board assembly to the computer base.
7Remove the screw that secures the power-adapter port to the computer base.
8Carefully lift the system-board assembly at an angle and release the connectors on the system board from the slots on the computer base.
6
5
1
2
3
| | 4 | |
| | | |
1 | display cable | 2 | screws (6) |
| | | |
3 | system-board assembly | 4 | speakers cable |
| | | |
5 | LAN-USB cable | 6 | pull-tab |
| | | |
