Dell 17R-7720, 17R-5720 owner manual Replacing the mSATA Card

Replacing the mSATA Card

Procedure

1Remove the new mSATA card from its packaging.

2Align the notch on the mSATA card with the tab on the system-board connector.

CAUTION: Use firm and even pressure to slide the mSATA card into place. If you use excessive force, you may damage the connector.

CAUTION: To avoid damage to the mSATA card, never place cables under the mSATA card.

3Insert the mSATA card connector at a 45-degree angle into the system-board connector.

4Press the other end of the mSATA card down into the slot on the system board and replace the screw that secures the mSATA card to the system-board connector.

Postrequisites

1Replace the base cover. See "Replacing the Base Cover" on page 20.

2Replace the battery. See "Replacing the Battery" on page 13.

3Follow the instructions in "After Working Inside Your Computer" on page 11.

mSATA Card (Optional) 37