book.book Page 32 Monday, October 8, 2012 4:17 PM
3
Procedure
1 Disconnect the antenna cables from the connectors on the Mini-Card.
2 Remove the screw that secures the Mini-Card to the
system-board connector.
1
2
3
4
1 antenna cables (2) 2 Mini-Card
3 screw 4 system-board connector
Lift the Mini-Card out of the system-board connector.
CAUTION: When the Mini-Card is not in the computer, store it in protective
antistatic packaging. For more information,
see "Protecting Against Electrostatic Discharge" in the safety information that
shipped with your computer.
32 | Wireless Mini-Card