MCUs

MCU Management

 

 

MCU Procedures

Note

See all the notes in “MCUs” on page 131.

To view information about an MCU

1Go to Network > MCU > MCUs. The MCUs list appears.

2In the list, select the MCU and in the Actions list, click View Details.

The Device Details dialog box appears, displaying detailed information about the MCU.

To add an MCU

1Go to Network > MCU > MCUs.

2 In the Actions list, click Add.

3In the Add MCU dialog box, complete the editable fields. See “Add MCU Dialog Box” on page 137.

4To set aside some of the MCU’s capacity for the Polycom CMA system’s use, set Video ports reserved for CMA system and Voice ports reserved for CMA system to the desired values (requires RMX v6.0 and above).

The ports reserved for the Polycom CMA system can be used by that system for scheduled conferences.

Note

This feature is not for use with a Polycom RealPresence Resource Manager system. The RealPresence Resource Manager system must have exclusive use of any MCUs on which it directly schedules conferences. Those MCUs should not be added to the DMA system’s conferencing resources.

5To use a gateway-capable MCU as an ISDN gateway, select the Enable gateway profiles check box and, on the Gateway Profiles tab, specify a dial string delimiter and add one or more session profiles.

6Click OK.

The new MCU appears in the MCUs list. If the MCU is configured as a conferencing resource, it’s placed into service.

Polycom, Inc.

149

Page 161
Image 161
Polycom 3725-76302-001LI manual MCU Procedures, Go to Network MCU MCUs