DMA OperationsGuide Conference Templates
212 Polycom, Inc.
H.264 high profile Sets a VSW conference to use Polycom’s
bandwidth-conserving H.264 High Profile codec
(previously supported only in continuous presence
mode).
If this is selected, all endpoints in the conference must
support High Profile. Endpoints not connecting at the
conference's exact line rate and resolution are
connected in audio-only mode. Available only on RMX
v7.6 or later MCUs with MPMx cards.
Resolution Available only if Video switching is selected. Offers the
following resolution settings:
•H.264 720p30
•H.264 1080p30 (available only on RMX MCUs with
MPM+ or MPMx cards)
•H.264 SD 30 (available only on RMX v7 MCUs with
MPM+ or MPMx cards)
•H.264 720p60 (available only on RMX v7 MCUs
with MPM+ or MPMx cards)
•H.264 CIF (available only on RMX v7 MCUs)
•H.263 CIF (available only on RMX v7 MCUs)
•H.261 CIF (available only on RMX v7 MCUs)
•HD_720_P_30
Line rate The maximum bit rate at which endpoints can connect
to conferences using this template.
If Video switching is selected, the lowest line rate
available depends on the Resolution setting chosen.
Encryption Specifies the media encryption setting for conferences
using this template:
•No encryption — All endpoints join unencrypted.
•Encrypt when possible — Endpoints supporting
encryption join encrypted; others join unencrypted.
•Encrypt all — Endpoints supporting encryption join
encrypted; others can’t join.
Note: Prior to v7.2, RMX MCUs supported only
encryption settings of On and Off. If an RMX running an
older version is selected for a conference, the settings
Encrypt when possible or Encrypt all are both converted
to On.
Consult the Polycom RMX 1500/2000/4000
Administrator’s Guide for the version in question for
detailed information about media encryption.
Table 8-4 Edit Conference Template dialog box (continued)
Field Description